Terrain Svt Pane - Garmin G2000 Pilot's Manual

Hazard avoidance
The Map Settings Screen on the Touchscreen Controller enables adjustment of map range settings above
which the system declutters terrain and obstacle data from the display. If the pilot selects a map range larger
than the map range setting, the system removes the data from the map. For terrain data, the enable/disable
function applies only to the Display Pains, while the range setting also affects the PFD Inset Navigation Map.
The system can display terrain data independently from obstacle data; however, the system will display
obstacles for which cautions or warnings exist when terrain is enabled for display and the map range is within
the setting limit.
Maps besides the Terrain SVT Pane use settings based on those selected for the Map Settings Screen on the
Touchscreen Controller. The maximum display ranges for obstacles on each map are dependent on the range
setting made for the navigation maps. If the maximum range for obstacle display on the navigation maps is
adjusted to below 20 nm, the highest obstacle display range settings on the other applicable maps are also
adjusted proportionally.
Terrain and obstacle data will not be displayed when the Navigation Map range is larger than
caution:
the Map Options range setting for Terrain Data and Obstacle Data.
Selecting the maximum navigation map range for terrain information:
1) From Home, touch Map > Map Settings.
2) If necessary, touch the Sensor Tab.
3) Scroll to find the Relative Terrain Settings Button.
4) Touch the Map Settings Button.
5) Touch the Terrain Range Button
6) Scroll if necessary, and touch a range button to select the maximum map range for the system to show relative
terrain information.
Selecting the maximum navigation map range for obstacle information:
1) From Home, touch Map > Map Settings.
2) If necessary, touch the Land Tab.
3) Touch the Obstacle Data Range Button.
4) Scroll if necessary, and touch a range button to select the maximum map range for the system to show obstacle
information.

terrain Svt Pane

The Terrain SVT Pane shows terrain, obstacle, and potential impact point information in relation to the
aircraft' s current altitude, without clutter from the basemap. It is the principal map pane for viewing Terrain
SVT information. If an obstacle and the projected flight path of the aircraft intersect, the display automatically
adjusts the map range if necessary to emphasize the display of the potential impact point(s).
Aircraft orientation on the Terrain SVT Pane is always heading up unless there is no valid heading. A box on
the map range arc indicates the selected map range. Turn the Joystick clockwise to increase the map range, or
counter-clockwise to decrease the map range.
404
This manual downloaded from http://www.manualowl.com
Garmin G2000 Pilot's Guide for the Cessna T240
190-01263-01 Rev. A