Garmin G2000 Pilot's Manual page 29

The Touchscreen Controller' s functions are arranged by screen. Each screen has a title which appears at the
top of the screen area (and below the CNS bar). The contents of each screen change dynamically in response
to pilot interaction or system input.
All of the Touchscreen Controller' s available functions are accessible from the Home Screen. This screen is
displayed after system power-up. The Home Screen may also be accessed any time it is not currently displayed
by touching the Home Button in the Button Bar below the screen area. Procedures in this Pilot' s Guide generally
begin from the Home Screen as a reference point; however it is not necessary to return to the Home Screen
before performing each procedure if the appropriate screen is already displayed.
Direct To
Button
Touched
As the Touchscreen Controller is used, certain selections will cause another screen to be displayed. To return
to the previous screen, touch the Back or Cancel Button (as applicable) in the Button Bar, or touch the Home
Button to return to the Home Screen. If the Home Screen was the previous screen, pressing either the Back or
Home Button will also return to the Home Screen.
The CNS Bar, positioned above the screen area, is always displayed during system operation and is accessible
at any time. Some functions on the CNS Bar will cause another screen to be displayed (in the screen area below
the CNS Bar); however, touching the Back or Cancel Button will return to the previous screen.
Touch to Access
Audio & Radios
Screen
Touch to Access
Intercom Screen
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
Home Screen
Touch to Return to
Previous Screen
Figure 1-12 Touchscreen Controller Screen Navigation
Touch to Access COM 1
Standby Screen
Figure 1-13 Accessing Screens with the CNS Bar
Garmin G2000 Pilot's Guide for the Cessna T240
Direct To Screen
Touch to Return to
Home Screen
Touch to Access COM 2
Standby Screen
SyStem Overview
Touch to Access
Transponder
Screen
15