Garmin G2000 Pilot's Manual page 27

Joystick
1
CLR Key
2
PFD Knob
3
4
Direct-to Key (
COM/NAV Key
5
BARO Knob
6
PROC Key
7
FPL Key
8
ENT Key
9
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
1 2
9
Figure 1-10 GCU 275 GDU Controller
Turn to change PFD map range
Press to activate Map Pointer for PFD map panning, and move laterally to move map pointer
Erases information, cancels entries, or removes menus
Press to enable/disable the selection cursor.
Data Entry: With cursor enabled, turn to enter data in the highlighted field (large knob moves
cursor location; small knob selects character for highlighted cursor location)
Scrolling: When a list of information is too long for the window/box, a scroll bar appears,
indicating more items are available to view. With cursor enabled, turn large knob to scroll
through the list.
Activates the direct-to function and allows the user to enter a destination waypoint and
)
establish a direct course to the selected destination (specified by identifier, chosen from the
active route)
Selects/deselects COM/NAV radio tuning mode on the PFD Controller
Turn knob to increase/decrease altimeter barometric pressure setting. Press knob to set
barometric pressure setting to Standard.
Gives access to IFR departure procedures (DPs), arrival procedures (STARs), and approach
procedures (IAPs) for a flight plan or selected airport
Shows/hides flight plan information
Validates or confirms a menu selection or data entry
Garmin G2000 Pilot's Guide for the Cessna T240
3 4 5
6
8 7
SyStem Overview
13