Garmin G2000 Pilot's Manual page 213

Airways may be displayed on the map at the pilot' s discretion using the Touchscreen Controller. The airway
range can also be programmed to only display airways on the MFD when the map range is at or below a specific
value.
Displaying/removing airways:
1) From Home, touch Map > Map Settings.
2) Touch the Aviation Tab, if necessary.
3) Touch the Low Altitude Airways Button to display/remove the low altitude airways.
4) Touch the High Altitude Airways Button to display/remove the high altitude airways.
Range
Button
Low
Altitude
Airways
Button
High
Altitude
Airways
Button
The airway range is the maximum map range on which airways are displayed.
Selecting an airway range:
1) From Home, touch Map > Map Settings.
2) Touch the Aviation Tab, if necessary.
3) Touch the low altitude or high altitude range button to display the range selection buttons.
4) Touch a range selection button to select the maximum map display range.The following range items are
configurable on the airways menu.
Airway Type
Low Altitude Airway
High Altitude Airway
190-01263-01 Rev. A
This manual downloaded from http://www.manualowl.com
Figure 5-22 Map Options Screen - Airways Setup
Airway Symbol/Line
Table 5-4 Airway Range Information
Garmin G2000 Pilot's Guide for the Cessna T240
Flight ManageMent
Highlighted Airway Default
Information Box Range (nm)
Range
Selection
Button
Maximum
Range (nm)
50 250
50 250
199