Operation; Prerequisites For Commissioning And Operation; Switching On The Microscope - Zeiss Axiovert 5 digital Instruction Manual

ZEISS

5 Operation

This chapter describes switching on/off the microscope as well as the first operating steps with
the microscope.
Info
For additional information and detailed descriptions, refer to further applicable documents or
ask your ZEISS Sales & Service Partner.
Info
Further information on the software and its operation is available in the software's online help.

5 .1 Prerequisites for Commissioning and Operation

The following basic prerequisites are necessary for commissioning and operation:
§
The Instruction Manual was read prior to commissioning or operation and kept for further
use.
§
The chapter
§
When using a Microsoft Surface Pro: The operator is acquainted with the general Windows-
based programs.
§
When using an Apple® iPad Pro®: The operator is acquainted with the general iOS®-based
programs.
§
If required: Basic training and safety briefing were successfully completed.

5 .2 Switching On the Microscope

ü
Prerequisite The microscope is connected to the mains
Procedure 1. Set the Power switch to position I.
à
à
2 . Switch on the Apple® iPad Pro® or the Windows Surface Pro.
3 . Open the Labscope software.
4 . Follow the instructions given in the Labscope Online Help.
9
The microscope is operational.
Instruction Manual ZEISS Axiovert 5 digital | en-US | Rev. 1 | 431030-7021-101
Safety was read and understood.
The power indicator lights up with blue light.
When the initialization is finished, the indica-
tor turns to green light.
5 Operation | 5.1 Prerequisites for Commissioning and Operation
[} 29].
33