Nosepiece With Objectives - Zeiss Axiovert 5 digital Instruction Manual

ZEISS

3 .2.4 Nosepiece with Objectives

Purpose The nosepiece is used to hold the objectives and to swivel the desired objective into the beam
path.
Position The nosepiece is mounted on the lower part of the stand.
The following features and controls are available:
§
The following objectives are installed:
§
§
§
§
1
Fig. 5: Nosepiece with objectives
1
3
Instruction Manual ZEISS Axiovert 5 digital | en-US | Rev. 1 | 431030-7021-101
3 Product and Functional Description | 3.2 Controls and Functional Elements on Components
encoded nosepiece with M27 mounting thread for six objectives
Pos. 1: Objective LD A-Plan 5x/0.15 Ph1 M27 (FWD = 11.7 mm at CG = 1 mm polystyrene)
Pos. 2: Objective LD A-Plan 10x/0.25 Ph1 M27 (FWD = 8.5 mm at CG = 1 mm polystyrene)
Pos. 3: Objective LD A-Plan 20x/0.35 Ph1 M27 (FWD = 4.9 mm at CG = 1 mm polystyrene)
Pos. 4: Objective LD A-Plan 40x/0.55 Ph1 M27 (FWD = 2.3 mm at CG = 1 mm polystyrene)
Nosepiece
Cover cap
2
3
4
2 Objective
4 Knurled ring for swivelling the nose-
piece
21