Operation - Zeiss Mechanical stage S mot. Operating Manual

Carl Zeiss
4

OPERATION

Controller EMS 3 is indispensable for using the mechanical / measuring stage S mot. with SYCOP 3.
The stage function is controlled by the SYCOP 3 system control panel. See separate SYCOP 3 operating
manual
− for operation under:
Home\Microscope\Function\XYZ Position or
Home\Microscope\Function\XYZ Distance
− for hardware settings under:
Home\Microscope\Memory\Hardware Setting
The Invert Direction function can be used to reverse the direction of stage travel. See
SYCOP 3 operating manual under:
Home\Setup\Mode\Stage.
The Fast XY function can be used for rapid stage movements over longer distances. To do
this, assign the Fast XY function to a button (see SYCOP 3 under:
Settings\Buttons) For quick positioning hold this button pressed while moving the joystick
accordingly.
If SYCOP 3 is not available on the microscope system, the mobile coaxial drive XY CAN can be
optionally used for external control of the stage (see Section 4.2).
The Parcentricity Manager can be activated on the SYCOP 3 for SteREO Discovery.V20 / V12
microscope systems with nosepiece S, coax 3x2 cod.
The Parcentricity Manager ensures that when the nosepiece is switched between the Stereo Mode (3D)
and Axial Mode (2D) positions the object detail being observed remains in the center of the image. The
necessary compensatory movement of the object is performed automatically by the installed mechanical /
measuring stage S mot. CAN.
Fig. 10 Activating/deactivating the
Parcentricity Manager
20
Operation
Opening menus:
Home\Setup\Mode\Stage
•
The function
pressing the Compensate 2D/3D Changes
button.
•
The LED lights up blue when the function is
activated.
The
automatically activated when using the
EMS 3. This ensures constant speed of
movement of object details in the
visual field.
435465-9000-701
Mechanical stage S mot. CAN
Measuring stage S mot. CAN
Home\Setup\Key
is activated / deactivated
stage manager function
by
is
08/2012