Table of Contents
Advertisement
October 16, 2007
October 24, 2007
November 29, 2007
April 23, 2008
Rev 1.009
OMNI-VII Firmware Updates at www.rfsquared.com
1.006
• Added example showing that the OMNI-VII will
limit the requested frequency if it is out of the
supported range.
• Added notation of change of meaning of CW
Weighting from version 1.022 onwards is now
0.0x7f = 0 to 50%. Was 0 to 24% for prior
versions of firmware.
• Added information on how ?A is handled with the
1.007
different options for menu item "SERIAL IF".
This will be available in Firmware Revision
1.023. Sections modified include:
Frequency Tuning
OMNI-VII Command Set Quick List
• Added Support for ?RMM for querying mode for
CT Logging program. Sections modified/added
include:
OMNI-VII Command Set Quick List
Main Mode Query – Orion Format
• Added Note to "?C1T" query that it returns the I-
F Filter that is currently in use as a second byte.
Sections modified include:
I-F Filter Selection
1.008
• Modified Serial Pass Thru maximum number of
bytes. Originally stated 21 and but is actually 11.
Typo error.
• Corrected Scaling error in documentation for CW
Keyer Weighting. A value of 0x7f means 50%
weighting.
• Added the format for decoding the Signal
Strength and Transmit levels to the RIP Data
Packet.
• Added indicator in Version Query to identify if
the rig has MARS transmit capability or if it is
restricted to ham bands only.
1.009
• Modified query for FM CTCSS in the Quick List
to show proper query ?C1G.
• Added TRIP Gain to interface
OMNI-VII Programmer's Reference Guide
63 of 63
Advertisement
Table of Contents
