Receive / Transmit Offset - Ten-Tec OMNI-VII 588 Programmer's Reference Manual

Receive / Transmit Offset

The OMNI-VII can adjust the current receive and or transmit frequency by a given
offset amount from the base receive or transmit frequency. This single offset value has a
range of 8192 to –8192Hz.
Format:
Where:
Example1:
Example2:
Rev 1.009
OMNI-VII Firmware Updates at www.rfsquared.com
'*' 'L' <d2> <d1> <d0> <CR>
'*' = the ASCII '*' symbol (0x2a)
L = the ASCII 'L' character (0x4C)
<d2> = b0 = 1 = Turn on Receive Offset
= 0 = Turn off Receive Offset
= b1 = 1 = Turn on Transmit Offset
= 0 = Turn off Transmit Offset
<d1> <d0> = The Offset amount in Hz signed value
*L<0x01> <0x0c><0xcc><CR> Offset to 3276, RIT On, XIT Off
*L<0x02> <0xf3><0x34><CR> Offset to –3276, RIT Off, XIT On
OMNI-VII Programmer's Reference Guide 28 of 63