AGC Mode Control
The Automatic Gain Control (AGC) Mode selections available in the OMNI-VII are
SLOW, MEDIUM, FAST, or OFF. The AGC mode can be changed at any time to take
advantage of changing band conditions. AGC can be turned OFF so that the receiver gain
is then controlled manually by the RF Gain control.
Format:
Where:
Example:
Squelch (all mode)
The squelch is active in all modes. The adjustment range is 0 to 127 representing 0 to
100% range.
Format:
Where:
Example:
Rev 1.009
OMNI-VII Firmware Updates at www.rfsquared.com
'*' 'G' <d0> <CR>
'*' = the ASCII '*' symbol (0x2a)
G = the ASCII 'G' character (0x47)
<d0> = ASCII '0' (0x30) for OFF
= ASCII '1' (0x31) for SLOW
= ASCII '2' (0x32) for MEDIUM
= ASCII '3' (0x33) for FAST
*G2<CR> sets MEDIUM AGC Mode
'*' 'H' <d0> <CR>
'*' = the ASCII '*' symbol (0x2a)
H = the ASCII 'H' character (0x48)
<d0> = 7 bit squelch selection (0x00 to 0x7f)
*H<0x08><CR> sets squelch level to 8.
OMNI-VII Programmer's Reference Guide
16 of 63