Table of Contents
Advertisement
Document Revision History
Date:
March 7, 2007
June 5, 2007
July 19, 2007
August 13, 2007
September 13, 2007
Rev 1.009
OMNI-VII Firmware Updates at www.rfsquared.com
Revision: Modifications
1.001
• Modified the Transmit Power to indicate that it
not only returns selected power, but also forward
and reflected power.
• Added " – REMOTE" or " – RADIO " text to the
Where At query.
• Modified S-Unit query to show that it returns s-
Units during receive and power values during
transmits.
• Modified S-Unit query to show two bytes for the
SUnit instead of only one byte.
• Modified the Internal Keyer Speed to show the
data value is 0..63wpm => 0..127. The data field
should be Desired_Speed * 127/63.
• Added VOX ON/OFF command/query.
• Added POD ENCODER Notifications.
• Added section on Ethernet Command/Query
Format
• Added reference stating that the Ethernet handlers
can be disabled in REMOTE Mode by setting the
first octet of the G8WAY IPADDR to 0. Provided
for users who control the rig serially in remote
mode.
• Made Transmit command *T available in Radio
1.002
mode also for logging programs
• Added a second Set/Get Split so that the N
variety is available in Radio mode also for
logging programs. (C2B still supported in Remote
mode)
1.003
• Added Display On/Off Command
• Added Compression Level supported in ?T query
• Added Compression Requests to Transmit cmd.
• Added reference to 8 bit compression
1.004
• Added Speaker On/Off
• Added documentation to indicate that the "?*"
command is available to "query all" parameters.
1.005
• Corrected Mode Values for FM, CWL, and FSK
in "Receive and Transmit Modes" section
OMNI-VII Programmer's Reference Guide
62 of 63
Advertisement
Table of Contents
