Version - Query Only; Receive Filter - Ten-Tec OMNI-VII 588 Programmer's Reference Manual

Version – Query Only
The version of the software in the OMNI-VII can be retrieved with this command.
Format:
Where:
Returns:
Where:
Where:
Example:
Returned:

Receive Filter

The receive filter selection for the OMNI-VII is a pre-defined set of 37 settings.
They range from as narrow as 200Hz to as wide as 14000Hz.
Format:
Where:
ID Filter
0 14000
1 9000
2 8000
3 7500
4 7000
5 6500
6 6000
7 5500
8 5000
9 4500
Example1:
Example2:
Rev 1.009
OMNI-VII Firmware Updates at www.rfsquared.com
'?' 'V' <CR>
'?' = the ASCII '?' symbol (0x3F)
V = the ASCII 'V' character (0x56)
"VER " ABCD "-588 " ["REMOTEx" or "RADIO x"] <CR>
ABCD = ASCII A.BCD version number
x in the Version String represents an indicator for MARS enabled
or not.
If x = a blank, then Ham Band only transmit is permitted.
If x = 'M' then transmit is enabled for MARS frequencies.
?V<CR>
VER 1010-588 REMOTE
band transmit only.
'*' 'W' <d0> <CR>
'*' = the ASCII '*' symbol (0x2a)
W = the ASCII 'W' character (0x57)
<d0> = ID for a given Receive Filter Bandwidth.
ID Filter
10 4000
11 3800
12 3600
13 3400
14 3200
15 3000
16 2800
17 2600
18 2500
19 2400
*W<0x03><CR> sets Receive Filtering to 7500Hz
*W<0x1A><CR> sets Receive Filtering to 26 or 1000Hz
OMNI-VII Programmer's Reference Guide
means: Version 1.010 Remote HAM
ID Filter
20 2200
21 2000
22 1800
23 1600
24 1400
25 1200
26 1000
27 900
28 800
29 700
ID Filter
30 600
31 500
32 450
33 400
34 350
35 300
36 250
37 200
20 of 63