Noise Blanker, Noise Reduction, And Automatic Notch; Receive And Transmit Modes - Ten-Tec OMNI-VII 588 Programmer's Reference Manual

Noise Blanker, Noise Reduction, and
Automatic Notch
The Noise Blanker, Noise Reduction, and Automatic Notch are available for use in
all modes. They can be used individually or together.
Format:
Where:
Example:

Receive and Transmit Modes

The OMNI-VII supports AM, USB, LSB, CWU, CWL, AM, FM, and FSK modes.
Format:
Where:
Example1:
Example2:
Rev 1.009
OMNI-VII Firmware Updates at www.rfsquared.com
'*' 'K' <d2> <d1> <d0> <CR>
'*' = the ASCII '*' symbol (0x2a)
K = the ASCII 'K' character (0x4B)
<d2> = Noise Blanker State (0=off action 1-7)
<d1> = Noise Reduction State (0=off action 1-9)
<d0> = Auto Notch State (0=off action 1-9)
*K<0x05><0x02><0x00><CR>
Sets Noise Blanker to 5, Noise Reduction to 2, Auto Notch Off.
'*' 'M' <d1> <d0> <CR>
'*' = the ASCII '*' symbol (0x2a)
M = the ASCII 'M' character (0x4d)
<d0> = setting for VFOA mode
<d1> = setting for VFOB mode
= ASCII '0' (0x30) for AM Mode
= ASCII '1' (0x31) for USB Mode
= ASCII '2' (0x32) for LSB Mode
= ASCII '3' (0x33) for CWU Mode
= ASCII '4' (0x34) for FM Mode
= ASCII '5' (0x35) for CWL Mode
= ASCII '6' (0x36) for FSK Mode
*M11<CR> sets USB for VFO-A, USB for VFO-B
*M35<CR> sets CWU for VFO-A, CWL for VFO-B
OMNI-VII Programmer's Reference Guide
Order maintains
compatibility
with Jupier Mode
18 of 63