Transmit Enable - Ten-Tec OMNI-VII 588 Programmer's Reference Manual

Transmit Enable

This controls whether attempts to transmit will produce RF or not. It is possible to
practice CW, listen to the sidetone, and not transmit. The range is from 0 for transmitter
disabled, to 1 for transmitter enabled.
Format:
Where:
Example:
Rev 1.009
OMNI-VII Firmware Updates at www.rfsquared.com
'*' 'C1N' <d0> <CR>
'*' = the ASCII '*' symbol (0x2a)
C1N = the ASCII 'C1N' characters (<0x43><0x31><0x4E>)
<d0> = binary 0 for Transmitter Disable
= binary 1 for Transmitter Enable
*C1N<0x00><CR> disables the transmitter RF output
OMNI-VII Programmer's Reference Guide 36 of 63