Ics (Wave Viewer Tool) Host Function - Renesas RAJ306010 User Manual

RAJ306010 RSSK(RTK0EML2C0S01020BJ)

4.18 ICS (Wave viewer tool) Host function

The board is equipped with an evaluation version of the ICS host function. Install ICS on Windows PC, connect
PC and board with USB cable, monitor and change global variables from PC, and display graphs (With this
product, up to 16 channels can be monitored and changed, and up to 4 channels can be displayed for graph
display.)
When using ICS, it is necessary to set a jumper pin in ICS_SEL.
ICS uses the UART function. Therefore, UART can not be used as a general-purpose function at the same time.
In order to incorporate the ICS function into the user program, it is necessary to incorporate the library.
ICS Programs and libraries for Windows are available from the download page of Desktop Lab Co., Ltd. website.
Please set the ICS referring to the following.
Reference :
Desktop Lab Co., Ltd. URL: http://www.desktoplab.co.jp/download.html
ICS Program for Windows : "ICS tool software for W1003 or Inverter kit for CQ publishing"
■
=>"ICS PC soft Download"
ICS Library : "ICS++ V3.xx library and Manuals download"->"RL78G1F(RAJ306000)"
■
ICS Library programing method: "ICS++ RL78 Lib for CS+/EWRL manual V3.7x download"
■
This tool or library is a sample and is free or unsupported. In addition, Renesas can not be held responsible for
any problems such as damage caused by incorporating or using this tool.
If you wish to use ICS in your user system, please consider purchasing the ICS / ICS ++ product version. The
product version of ICS/ICS++ is sold by Desktop Lab Co., Ltd.
R18UZ0078EJ0100 Rev.1.0
Mar 24, 2021
4. Function
Page 37