Renesas RAJ306010 User Manual page 6

Warnings Regarding Use of the Product
 Danger Items
• The product should be used only by persons (users) having a thorough knowledge of electrical and
mechanical components and systems, a full knowledge of the risks associated with handling them,
and training in inverter motor control and handling motors, or equivalent skills. Users should be
limited to persons who have carefully read the Caution Items contained in this manual.
• Unlike typical equipment, the product has no protective case to ensure safety, and it contains
moving parts and high-temperature components that could be dangerous. Do not touch the
evaluation board or cables while power is being supplied.
• Carefully check to make sure that there are no pieces of conductive materials or dust adhering to
the board, connectors, and cables.
• There are moving parts, driven by a motor. Do not touch the motor while power is being supplied.
• Ensure that the motor is insulated and placed in a stable location before supplying power.
Do Not Connect Load to Motor!
• This could cause fire, burns, or injury.
Warning Items
Caution – Rotating Parts!
• The system includes a motor. Touching the rotating shaft could cause high-temperature burns or
injury.
Always insert plugs, connectors, and cables securely, and confirm that they are fully inserted.
• Incomplete connections could cause fire, burns, electric shock, or injury.
Use the power supply apparatus specified in the manual.
• Failure to do so could cause fire, burns, electric shock, injury, or malfunction.
Disconnect the power supply and unplug all cables when the system will not be used for a period of
time or when moving the system.
• Failure to do so could cause fire, burns, electric shock, or malfunction.
• This will protect the system against damage due to lightning.
Use a mechanism (switch, outlet, etc.) located within reach to turn off (disconnect) the power supply.
• In case of emergency, it may be necessary to cut off the power supply quickly.
Turn off the power supply immediately if you notice abnormal odor, smoke, abnormal sound, or
overheating.
• Continuing to use the system in an abnormal condition could cause fire, burns, or electric shock.
Do Not Disassemble, Modify, or Repair!
Doing so could cause fire, burns, electric shock, injury, or malfunction.
• Disassembly, remodeling, repair, or modification should be done at the customer's own risk, and
should be done safely after carefully checking the circuitry.
Do not use the product for any purpose other than initial evaluation of motor control in a testing room or
lab. Do not integrate the product or any part of it into other equipment. Do not insert or remove cables
or connectors when the product is powered on.
• The product has no safety case.
• Failure to observe the above could cause fire, electric shock, burns, or malfunction.
• The product may not perform as expected if used for other than its intended purpose.
Danger
Warning