Setting Up Your Captel 2400I - Ultratec CapTel 2400i User Manual

Setting up Your CapTel 2400i

For complete instructions, please see the Setup Guide.
Requirements
1. High-speed Internet access. Your CapTel 2400i can connect to your
Internet service either with an Ethernet cable or through a wireless (WiFi)
network. Depending on your Internet setup, a router may also be required
to allow you to connect more than one device to your Internet service.
2. Telephone Service. Can be analog line, DSL with lter, VOIP, ber optic,
or Digital Cable phone service. CapTel does NOT work with digital Private
Branch Exchange (PBX) systems found in some o ce environments,
residential facilities, and hotels – unless an analog port is available.
If you do not have dial-tone telephone service, contact Customer Service for
installation assistance.
3. Standard electrical power (AC adapter plugs into standard wall outlet).
Step 1: Select a Location
Pull out the kickstand in the back, then set up the CapTel 2400i in a
place where:
• A high-speed Internet (Ethernet) jack or your wireless router is
located nearby.
• A telephone jack is located nearby (can be analog line, DSL with
lter, VOIP, ber optic, or Digital Cable phone service).
• There is an electrical outlet nearby.
• The surface it will be set on is stable and secure.
• The area is protected from excessive heat or humidity.
The outlets for power, the phone line, and the Ethernet connection should all
be located nearby, as each cord needs to plug into your CapTel 2400i. If your
Internet access is located in a di erent room than where you plan to use the
CapTel 2400i, a WiFi setup is recommended. Please see the Setup Guide or
contact CapTel Customer Service for help setting up.
Customer Service: 888-269-7477 G E T T I N G S TA R T E D
11