Setting Up The Ezcom Pro - Ultratec EZcom PRO User Manual

2. Install four AA alkaline
batteries. Make sure that
the + and – symbols are
properly in line. Replace the
door when you are finished.
The batteries save any
settings or messages when
you are not using the AC
adapter.

Setting up the EZcom Pro

The EZcom Pro may be installed either by itself or with a telephone.
These steps explain how to install the EZcom Pro by itself.
1. Connect one end of a
telephone line to the jack
marked with the
symbol and the other end
to a telephone wall outlet.
2. Plug the AC adapter cord
into the TTY and then plug
the AC adapter into a wall
outlet.
The EZcom Pro is now fully
installed. You can begin
making TTY calls.
G E T T I N G S TA RT E D • 9