Keypad Lights; Setting The Ringer Volume; Adjusting The Ringer Pitch; Tone Control - Ultratec CapTel 2400i User Manual

Keypad Lights

The CapTel keypad lights up for easy dialing in dark environments. You can
set the keypad lights to go o when your CapTel is not in use. When set to
"o " the keypad lights will go o after approximately 30 seconds of non-use.
The default setting is Keypad Lights On.
Settings 

Setting the Ringer Volume

You can turn the Ringer Volume up to a setting you hear best. The default
setting is ve (5). To turn the ringer o , select setting level zero (ringer muted).
Settings 

Adjusting the Ringer Pitch

You can adjust the frequency of the CapTel ringer to a High, Medium, or
Low range that you hear best. The default setting is Med.
Settings 

Tone Control

You can adjust the frequency of the sound coming through the CapTel
handset to a frequency range that you hear best. Select from Low, Medium,
High, or Customizable Frequency Ranges. To customize the frequency
range, see page 33 for instructions.
Settings 
Customer Service: 888-269-7477
General Settings 
Sounds 
Sounds 
Sounds 
Keypad Lights On
Ringer Volume
Ringer Pitch
Tone
107
S E T T I N G S