Ultratec CapTel 2400i User Manual page 12

Back view of CapTel 2400i
1
Telephone Jack
1
Plug the telephone cord (provided) in here (RJ11 jack). Telephone cord can
be for most types of telephone service, including: analog, VOIP, ber optic,
digital cable service, or analog with DSL service. CapTel does NOT work
with PBX systems unless an analog port is available.
LNK/ACT – Status Light
2
Lets you know if your Ethernet cable is connected to the Internet and
whether activity is on the line. NOTE: the LNK/ACT indicator does not light
up when connected via WiFi.
Ethernet Jack
3
Plug the Ethernet cable (provided) here to connect to your Internet service.
If you connect to the Internet using a WiFi network, you do not need to
plug in the Ethernet cable.
Power Jack
4
Plug the AC power adapter here. Use only the AC power adapter that came
with your CapTel 2400i phone. Any other adapter may damage the phone.
Kickstand
5
Pull out and position the kickstand to nd the most convenient angle for
reading the CapTel display screen.
10
G E T T I N G S TA R T E D
3 4
2
Customer Service: 888-269-7477
5