Making/Answering A Call On A Bluetooth Headset/Neckloop - Ultratec CapTel 2400i User Manual

Making/Answering a Call on a Bluetooth®
Headset/Neckloop
Dial Number
Contacts
Your Bluetooth device must be paired and active with the CapTel 2400i
before you can make/answer calls with it. Please see "Connecting a
Bluetooth Headset/Neckloop" on page 22 for instructions.
To make a call:
1. Check that your Bluetooth device is connected by con rming that the
name of your device is listed in the upper left corner of the CapTel
display screen.
2. Touch (Headset) to turn on your Bluetooth device.
3. Use the CapTel dialing keypad
wish to call.
4. Listen or watch the display screen to know when someone answers.
Speak as you normally would using your Bluetooth device. You will be
able to hear the other party's voice over your Bluetooth device. Captions
of the conversation will appear in the CapTel display screen.
You may need to adjust the volume directly on your Bluetooth device.
5. When you are nished with your conversation, touch
(End Call). The call will "hang up". Or you can pick up the
touch
handset brie y and hang it up again to end the call.
28
M A K I N G A N D A N S W E R I N G C A L L S
Redial Redial
555-0234
to dial the number of the person you
OPER
(Options), then
Customer Service: 888-269-7477