Table of Contents
Advertisement
Install the Thermal Dryer Assembly
1. Carefully place the Thermal Dryer Assembly onto the support
brackets. See Figure 5-34. Secure and torque to 15 in-lbs.
2. Attach the data cable to the right side of the Thermal Dryer Assembly.
3. Attach the Thermal Dryer Assembly power cord the to back of the
printer.
Remove the Thermal Dryer Right Endcap Assembly
NOTE
The Thermal Dryer Right Endcap Assembly contains the
Printed Wiring Assembly for the Dryer.
WARNING
Once the dryer is plugged in, there is continuous power
being applied to the dryer, even when the printer is
turned off.
DISCONNECT POWER CORD BEFORE SERVICING!
NovaJet 800 Series Service Manual
Assembly\Disassembly
5-62
Advertisement
Table of Contents
