Table of Contents
Advertisement
Figure 4-91. Driver/RIP Problem.
Figure 4-92. Inadaquate Network Data Transfer Rate.
5. Check with the RIP or Print Driver vendor for the latest software
upgrades to ensure no conflicts exist with currently loaded
firmware. To check current firmware version from Main Menu
select Utility Menu, select Service Menu, select About. The
display will indicate the firmware version as follows:
MB: xx-27-0
where:
xx is the model type
27 indicates the printer is an ENCAD model
0 indicates that printing is authorized.
Refer to the 'Checking Firmware' procedure.
NovaJet 800 Series Service Manual
Troubleshooting
4-88
Advertisement
Table of Contents
