Table of Contents
Advertisement
Install the Left, Top, and Right Covers
To install the Left Cover:
1. Position the Left Cover over the Left Frame and while depressing the
retracting stop assembly on the Support Bracket, lower the Left Cover
into position onto the Left Frame. Release the retracting stop
assembly.
2. Using a #2 Phillips screwdriver, secure the Left Cover with two screws
located under the frame (torque to 8 in-lbs).
3. Reinstall the ink reservoirs and reservoir door.
To install the Right Cover Assembly:
1. Position and hold the Right Cover Assembly over the Right Baseplate
and reconnect the Display data ribbon cable to J10 on the Main PWA.
2. Reconnect the Keypad flex cable to J9 on the Main PWA. Ensure that
the caution label on the flex cable is facing the DIMM slot.
3. While depressing the retracting stop assembly on the Support
Bracket, lower the Right Cover Assembly into position onto the Right
Baseplate. Release the retracting stop assembly.
CAUTION
Applying too much torque to the lower screws can cause
the mounts for the standoffs on the cover to break, requir-
ing a replacement of the cover.
NovaJet 800 Series Service Manual
Assembly\Disassembly
5-5
Advertisement
Table of Contents
