Table of Contents
Advertisement
Figure 4-39. Connectivity Problem .
19. Horizontal bands (0.2 mm to 1 mm) which extend beyond the
page layout are usually caused by the RIP or workstation
memory or the driver not having sufficient work space or other
network data flow related problems. Ensure 1GB is free on hard
drive at all times; 256 MB of memory is suggested.
Figure 4-40. Dirty or Defective Encoder Strip.
20. Clean or replace encoder strip for image skewing (image walking
or skipping). Whether the image skews slights or off the page
the encoder strip is at fault. Typically images which skew will
have some horizontal banding, often a walking image can also
NovaJet 800 Series Service Manual
Troubleshooting
4-40
Advertisement
Table of Contents
