• Crystal Semiconductor CS8416 192 kHz Sony/Philips Digital
Interface Format (SPDIF) receiver
Optical and coaxial connectors for SPDIF input
• Flash memory
512K x 8-bits
• Synchronous dynamic random access memory (SDRAM)
48 MB (8M x 48 bit)
• Interface connectors
14-pin emulator connector for JTAG interface
SPORT connectors
Link port 0 and link port 1
External port connectors (not populated)
• General-purpose IO
Four push button flags
Three push button interrupts
Six LED outputs
• Analog Devices ADP1864, ADP3338 and ADP3339 voltage
regulators
The EZ-KIT Lite board has a flash memory device that can be used to
store user-specific boot code. By configuring the switch for EPROM boot,
the board can run as a stand-alone unit. The ADSP-21161N EZ-KIT Lite
package contains a flash programmer utility, which allows you to program
the flash memory. The
on page
1-13.
ADSP-21161N EZ-KIT Lite Evaluation System Manual
www.BDTIC.com/ADI
"Flash Programmer Utility"
Preface
is described
xiii
Need help?
Do you have a question about the ADSP-21161N EZ-KIT Lite and is the answer not in the manual?
Questions and answers