Moving The Cabinet - PROLiNK Master III Series User Manual

2-4 Moving the Cabinet

The UPS is fixed on the pallet with 2 fixing cabinet plates. When removing it, pay attention to the movement
of the casters to avoid accidents.
The cabinet can be pushed forward or backward only. Pushing it sideward is not allowed. When pushing the
cabinet, pay attention not to overturn it as the gravity center is high.
1. If you need to move the UPS over a long distance, please use appropriate equipment like a forklift. Do not
use the UPS casters to move over a long distance.
2. After the UPS has been removed from the pallet to ground, we suggest that at least three people move
the UPS to the installation area. One person holds a lateral side of the UPS with hands, another holds the
other lateral side of the UPS with hands, and the other person pushes the UPS either from the front side or
from the back side to the installation area and avoid tipping the UPS.
3. The casters are designed to move on level ground. Do not move the UPS on an uneven surface. This might
cause damage to the casters. Toppling the UPS could also damage the unit.
4. Ensure that the weight of UPS is within the designated bearing capacity of any handling equipment.
5. At the bottom of the UPS, the four casters help you to move the UPS to a designated area. Before you
move the UPS, please turn the four leveling feet counterclockwise to raise them off the ground. This
protects the leveling feet from damage when moving the UPS.
6. Fix the cabinet firmly to the ground with screwing the fixing cabinet plate. Refer to Figure 2-6.
F ixin g
c abinet pla te
Leveli ng fo ot
Ca ster
Figure 2-6
6