Parameters - Conair GB User Manual

Gb and wsb series gravimetric blenders with 12-component control
Hide thumbs Also See for GB:
Table of Contents

Advertisement

All AUTOWEIGH BLENDER controllers operate according to certain
internal PARAMETERS.
have made over 160 parameters accessible for change through the keypad.
There is one GENERAL group and twelve COMPONENT groups.
BRIEF explanations are given first.
the section that follows.
NOTE: Values shown here are initial ROM values of a model 940.
values for other models are listed at the end of this section.
Parameters are five digits, with leading zeros added.
TIMES are expressed as seconds, minutes, or interrupts.
(244 interrupts = 1 second).
WEIGHTS are always expressed as GRAMS.
100 and 200 models use tenths of grams: (xxxx.x). (00010 = 1 gram)
400, 900, and 1800 models; full grams: (xxxxx). (00050 = 50 grams)
PERCENTS are expressed in tenths for settings (0xxx.x),
and full percents for other percentage references (00xxx).
----------------------------------------------------------------------
GENERAL PARAMETERS
FLG 00000
turns on the RECIPE, BATCH, FAST, and TAG keys.
These four keys will NOT WORK unless you set this parameter.
The RECIPE key is for storing up to 99 recipes.
The BATCH key allows for filling a barrel or gaylord.
The FAST key allows a higher output mode.
The TAG key adds certain information to all printouts.
MIX 00010
MIX TIME
This parameter times how long the MIX motor runs.
set to 00010; 10 seconds of mix.
JOG 03030
JOGS, number and frequency.
This parameter specifies the number of jogs of the mix blade and
how often they occur.
30 seconds, 30 times.
FCV 00006
TIME the Flow Control valve delays before opening (sec.).
This parameter holds each batch in the mix chamber for a time to
assure mixing.
flow control valve under the mix chamber.
DTI 00004
Weigh bin dump TIME at end of cycle. (seconds)

PARAMETERS

Because customer requirements vary widely, we
PARAMETER LIST - BRIEF EXPLANATIONS
(20 parameters) (900 series settings shown)
The default is set to 03030; a jog every
This is only for units equipped with the optional
Page 48
FULL information is given in
The default is
Initial

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GB and is the answer not in the manual?

Table of Contents

Save PDF