Specifications; One Conair Drive Pittsburgh, Pa - Conair GB User Manual

SPECIFICATIONS

MODELS
Performance characteristics
Batch size lbs {g}
Maximum throughput lbs/hr {kg/hr}*
Bin capacity - large bins
ft 3 {liter}
Maximum number of materials
Number of standard dispensing valves †
Number of micro dispensing valves
Control software (# of components)
Dimensions inches {mm}
A - Height above mounting plate
B - Width
C - Depth
D - Controller height
E - Controller width
F - Controller depth
Weight lbs {kg}
Installed
Shipping
Voltage Running load amps
120V/1 phase 50/60 hz
220V/1 phase 50/60 hz
Compressed air requirements
Material filling options
Self-contained vacuum loader
Central vacuum receiver
Hand-fill
One Conair Drive Pittsburgh, PA 15202
GBM22 GBM31
.882 {400} .882 {400}
97 {44} 111 {50}
0.4 {11.3} 0.4 {11.3}
4 4
2 3
2 1
4 or 12 4 or 12
27.25 {693} 27.25 {693}
21.75 {552.4} 21.75 {552.4} 21.75 {552.4}
21.75 {552.4} 21.75 {552.4} 21.75 {552.4}
11.25 {285.75} 11.25 {285.75} 11.25 {285.75}
12.25 {311.15} 12.25 {311.15} 12.25 {311.15}
8.19 {208.03} 8.19 {208.03} 8.19 {208.03}
70 {32} 70 {32}
90 {41} 90 {41}
1.0 1.0
0.5 0.5
40 psi @ 1 ft 3 /min { 2.8 bars @ 0.47 liters/sec}
1/4 in. NPT fitting
ML8 or Z2HL
DL8
flat lid
412-312-6000 FAX 412-312-6227
GRAVIMETRIC BATCH BLENDERS
Autoweigh GBM Series Models
CONTROL (REMOTE MOUNTED)
GBM40 MOUNTING INTERFACE
.882 {400}
132 {60}
0.4 {11.3}
4
4
0
4 or 12
27.25 {693}
SPECIFICATION NOTES:
* Maximum throughput rates are based on
using all dispense valves and dispensing no
more than 1.0% colorant and/or additive per
each micropulsing valve. Refer to the selec-
tion guide for more specific throughput infor-
mation.
70 {32}
† The Regrind position features a 1.5-inch
diameter valve to ensure flow or irregularly
90 {41}
shaped material.
1.0
If you will be using this blender for central
0.5
blending applications, it will be necessary to
use a flow control valve with an air solenoid.
www.conairnet.com
TPBS015/0700
APPENDIX B