Parameters/Global Reset (For Service Users Only!) (Level 3) - Conair TrueBlend TB45-4 User Manual

TrueBlend™
7.6.4

Parameters/Global Reset (for service users only!) (Level 3)

The overscreen
Press the button beside "Parameters".
Please contact Conair service before
attempting to make a change to the
parameters, number or value. Currently,
IMPORTANT
there are no parameter functions that
can be set or changed.
The "Control Variable" screen opens.
Assign a parameter number and a pa-
rameter value (no function currently
set).
Press
on whether the parameters should be
readout or set (no function currently
set).
Press
the controller completely. (Defaults to
the home screen.)
A "Global Reset" can also be done by
switching off the unit for more than two
minutes. Once "off" is pressed the unit will
default to the home screen.
Press the
"off" to "on" at "Diagnostic Report" to
create accuracy reports for the service.
(Refer to Section 7.14 for connection
options.)
Edition: February 2007
or depending
at "Global Reset" to reset
button to toggle from
Operation
51