Conair GB User Manual page 39

number that will make all natural settings add up to 1000.
In this way each NATURAL setting will represent a percent of
the total natural blend.
If the sum of natural settings exceeds 1000, component 2
will be set to 000, and the other naturals will be ratioed
to each other.
The TY and CS parameters are the ones that are altered.
TY sets TYPE to Regrind, Natural or Additive.
the thumbwheel swatches.
knows to calculate a setting based on the other naturals
such that all settings total 1000.
On 140, 240, 440 and 940 models:
If (R,N,C,A) is selected, PARAMETERS are set:
If (N,N,C,A); same as above except:
If (N,N,N,A); same as the first except:
If (R,N,N,A); same as the first except:
On 220 and 420 models:
Changes are the same as above except components 6 and 5
are altered instead of components 3 and 4.
If (R,N,C,A) is selected, PARAMETERS are set:
If (N,N,C,A); same as above except:
If (N,N,N,A); same as the first except:
If (R,N,N,A); same as the first except:
All other TYPE parameters are set to (_TY = OFF).
*05 Press (*,0,5) to inhibit the (00=CLEAR) display at the end
of the VIEW sequence.
for retrieval of material usage information, may wish to
restrict an operators ability to clear the material usage
data at the controller.
the floor operators ability to clear this data.
toggle between (CLEAROFF) and (CLEAR ON).
*11 Press (*,1,1) to enter the correct date and time into the
real-time clock.
are retrieving information using a printer or are collecting
data by computer.
The first display will indicate USA or EUROPE date format.
Use the CE key to toggle from one to the other.
USA will cause all dates to be displayed MONTH/DAY/YEAR.
(1TY = REG) (2TY = NAT)
(1CS 30000) (2CS 00100)
(1TY = NAT) (2CS 40000)
(1TY = NAT) (2CS 40000)
(2CS 40000)
(1TY = REG) (2TY = NAT)
(1CS 30000) (2CS 00100)
(1TY = NAT) (2CS 40000)
(1TY = NAT) (2CS 40000)
(2CS 40000)
Customers using MLAN or G2 software
Correct date and time is helpful if you
Six entries will be requested.
Page 40
If CS = 40000 the software
(3TY = ADD)
(3CS 10000)
(3TY = NAT)
(3TY = NAT)
(6TY = ADD)
(6CS 10000)
(6TY = NAT)
(6TY = NAT)
This option allows you to remove
CS assigns
(4TY = ADD)
(4CS 20000)
(5TY = ADD)
(5CS 20000)
Press * to