Version; Event Info - FLIR DN4083E64 Instruction Manual

15 Using the Main Menu
To access the Record Info menu:
• From the Main Menu, click

15.2.3 Version

The Version sub-menu allows you to view information about the current firmware installed
on the system.
To access the Version menu:
• From the Main Menu, click

15.2.4 Event Info

The Event Info menu shows you a display of system alarms. Activated alarms are high-
lighted in white. Additional info such as channels that are currently detecting motion is
shown.
The following alarms are shown in the Alarm Status menu:
• No HDD: No hard drive is detected.
• Disk Error: Hard drive error detected.
• Disk Full: Hard drive is full.
• IP Conflict: More than one device on the network is using the same IP address.
• Net Offline: System is not connected to the network.
• MAC Conflict: More than one device on the network is using the same MAC address.
• External Alarm: Sensor/alarm device (not included) has been triggered.
• Video Loss: Shows disconnected channels.
• Camera Masking: Camera masking alarm has been triggered (e.g. someone has
covered the camera lens).
• Motion Detect: Shows channels with active motion alarms.
• IPC Ext Alarm: Alarm/sensor device (not included) connected to camera has been
triggered.
• IPC Offline Alarm: IP camera is offline.
#LX400022; r.16694/30364; en-US
and then select Info>Record Info.
and then click Info>Version.
48