Event - FLIR M44168 Instruction Manual

16 Using the Main Menu
3. Configure the following:
• Mail Select: Select Gmail or Yahoo to send emails from an existing Gmail or Yahoo
email account. This automatically enters the SMTP server, port, and Encrypt Type.
Select Customized to use a different email server.
• SMTP Server: Enter the SMTP server address.
• Port: Enter the port used by the SMTP server.
• Anonymous: Check if your server supports anonymous log ins. Otherwise, leave
this unchecked.
• User Name: Enter the SMTP user name.
• Password: Enter the SMTP password.
• Receiver: Enter the email address that will receive alerts.
• Sender: Enter the sender's email address.
• Subject: Enter the subject line for the email alert.
• Attachment: Check to include a jpg image attachment of the camera.
NOTE
You must enable the Snapshot option for motion detection on each camera you would to receive
attachments. For details, see 16.3.7 Configuring Motion Detection, page 54.
• Encrypt Type: Select SSL or TLS if your server uses encryption. Select None if
your server does not use encryption.
• Event Interval: Enter the interval between alert emails.
• Health Enable: Check to enable health check emails. Health check emails will be
sent periodically to ensure that the system is functioning normally.
• Interval: Enter the interval in minutes for health check emails.
NOTE
By default email alerts will be sent out at any time of day. Click Setup next to Email Schedule to con-
figure specific times of day that you will receive email alerts.
4.
5. Click Test to send a test email.
6. Click OK to save settings.

16.3.6 Event

The Event menu allows you to configure settings for motion detection, video loss, and sys-
tem warnings.
#LX400057; r. 1.0/24460/24461; en-US
53