Table of Contents
Advertisement
TSW4100 Graphical User Interface (GUI) Software
6
TSW4100 Graphical User Interface (GUI) Software
Using the provided software, the user can download control register and coefficient information data to the
GC5016 and read back status register information.
Note:
The TSW4100 ships with firmware installed to operate this interface with a PC. This interface
must be added to any new firmware that is installed or generate an alternative method of
writing and reading to the GC5016.
The next two sections describe how to start the TSW4100GUI user interface
graphical user interface controls
6.1
Starting the TSW4100GUI
Note:
To interface with the TSW4100, the CDCM7005 must be operating and locked.
To start the TSW4100GUI interface:
1. Click the Windows menu sequence start → All Programs → Texas Instruments → TSW4100GUI →
TSW4100GUI_vXpXX.exe,
application first displays a DOS Test Window. The text Extracting CTF... ...CTF archive extraction
complete. only displays the first time the TSW4100GUI application runs.
20
TSW4100EVM
Figure 21. SIF Control
(Section
6.2).
(Figure
14) where vXpxx represents the version of software. The
(Section
6.1) and the
SLWU052A – December 2007 – Revised September 2008
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
