Table of Contents
Advertisement
iPF770
9
The Confirm Update dialog box is displayed.
Configure Update Target and click the Execute but-
ton.
The printer control panel and printer driver media in-
formation is updated.
•
You should normally select Update the printer control panel and printer driver.
Note
10
The message on the right is displayed.
If you want to save the current media information in a file,
click the Yes button. If you do not want to save it, click the
No button.
•
The media information is saved as a media information file (.amx file).
•
Note
For the method for loading a saved media information file in another computer, see "Applying a Saved
Media Information File on Another Computer."
Media Configuration Tool Main Window
Media Configuration Tool Main Window
The explanation below is on the Media Configuration Tool main window.
Use the following procedure to open Media Configuration Tool main window.
•
Do not attempt to print or turn the printer off while the program is communicating with the printer.
Important
1
From the start menu, select All Programs > imagePROGRAF Media Configuration Tool > imagePROG-
RAF Media Configuration Tool.
2
The Select Printer dialog box is displayed. Select
the printer for which to configure the media informa-
tion, and then click the Next button.
•
If you are using the printer without installing the printer driver, click the Specify a printer that is not in-
stalled button and specify the printer by following the on-screen instructions.
Note
•
In the following screens, you cannot change the printer where media type information is to be updated.
User's Guide
P.371
➔
Media Configuration Tool Main Window
357
Advertisement
Table of Contents
Troubleshooting
