Canon imagePROGRAF iPF771 User Manual page 264

Page Setup Pane
• D
Enlarged/Reduced Printing
Select this checkbox to choose the following options.
•
Resizing Originals to Fit the Roll Width
• Resizing Originals by Entering a Scaling Value
• F
Fit Roll Paper Width
Resizes the document image to match the roll width.
• G
Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
• H
Borderless Printing
Borderless printing is available if roll paper is selected in the
Activate this setting for borderless printing to match the size and width of the paper.
• Borderless Printing by Resizing Originals to Fit the Roll Width
• Borderless Printing at Actual Size
• J
Print Centered
Select this checkbox to print document images in the center of the paper.
•
Printing Originals Centered on Rolls
• Printing Originals Centered on Sheets
• K
No Spaces at Top or Bottom
Select this checkbox to print the next image skipping blank areas above and below printable data in docu-
ments, which enables you to conserve the paper.
• Conserving Roll Paper by Printing Originals Without Top and Bottom Margins
• L
Rotate Page 90 degrees
Select this checkbox to rotate the document image by 90 degrees before printing.
• Conserving Roll Paper by Rotating Originals 90 Degrees
• N
Free Layout
Select this checkbox to start imagePROGRAF Free Layout before printing.
This allows you to print multiple documents next to each other.
•
Important
•
Printing Multiple Originals Next to Each Other
264
➔
When Print Preview is selected on the Main panel, Print Preview is disabled.
P.60
➔
P.63
➔
A
Paper Source list.
➔
P.72
P.113
➔
P.117
➔
P.121
➔
P.99
➔
P.80
P.124
➔
iPF770
User's Guide