Printing From Autocad - Canon imagePROGRAF iPF771 User Manual

Printing from AutoCAD

10
Access the Page Setup pane.
11
Select and click a roll paper in the
12
Select the paper width of the roll loaded in the printer for
is selected.
13
Specify additional printing conditions.
For details on available printing conditions, see "Printer Driver Settings ."
14
Confirm the print settings, and then click
Note

Printing from AutoCAD

Printing from AutoCAD
Printer Driver Optimization Module for AutoCAD is software for printing optimally from AutoCAD with the printer
driver.
By optimally controlling the processing resolution of raster data and the memory to be used in image processing of
AutoCAD, printing superior in reliability and productivity is realized.
If you install Printer Driver Optimization Module for AutoCAD on a computer on which supported AutoCAD is instal-
led, it will be installed automatically.
•
Printer Driver Optimization Module for AutoCAD is applied automatically when you print from AutoCAD, and opti-
mal printing is performed.
Note
Confirming the Installation of Printer Driver Optimization Module for AutoCAD
You can confirm whether Printer Driver Optimization Module for AutoCAD is installed by the following method.
1
From the File menu of AutoCAD, select Print.
42
A
•
For tips on confirming print settings, see "Confirming Print Settings ."
•
You can conserve roll paper by configuring settings suitable for the document.
For details on how to conserve paper and print, see "Conserving Roll Paper by Rotating Originals 90 De-
grees ."
P.122
➔
Paper Source list.
B
Roll Width. In this case, ISO A2/A3 (420.0mm)
M
Print to start printing.
P.248
➔
P.250
➔
User's Guide
iPF770