All Parameter Clear - Mitsubishi Electric FR-F740-00023-EC Instruction Manual

3.23 All parameter clear

POINT
· Set "1" in ALLC parameter clear to initialize all parameters. (Parameters are not cleared when "1" is set in Pr.
77Parameter write selection. In addition, calibration parameters are not cleared.)
1.
Screen at powering on
The monitor display appears.
2.
Press
mode.
3.
Press
setting mode.
4.
Turn until
clear) appears.
5.
Press
value.
" "(initial value) appears.
6.
Turn to change it to
the setting value " ".
7.
Press
Setting
0 Not executed.
1 All parameters return to the initial values. *
* Pr. 75, Pr. 145, Pr. 171 to Pr. 174, Pr. 255 to Pr. 258, Pr. 343, Pr. 496, Pr. 497, Pr. 503, Pr. 563, Pr. 564, Pr. 888, Pr. 889 are not cleared.
and
The inverter is not in the PU operation mode.
1. Press
2. Carry out operation from step 6 again.
Operation
to choose the PU operation
to choose the parameter
(all parameter
to read the currently set
to set.
· Press to read another parameter.
· Press to show the setting again.
· Press twice to show the next parameter.
Description
are displayed alternately ... Why?
.
is lit and the monitor (4 digit LED) displays "0" (Pr. 79 = "0" (initial value)).
Display
PU indication is lit.
The parameter
number read
previously appears.
Flicker ··· Parameter setting complete!!
All parameter clear
227
3