Upgrading And Provisioning; Upgrade And Provisioning Configuration - Grandstream Networks GXV34 Series Administration Manual

Set the DTMF content that is going to be sent when the DTMF button is pressed under Call
DTMF Content
screen��"Keypad".
General Settings
Display Open Door Configures whether display Open Door button when there is an incoming call. If set to "Yes", you
Button when cannot open door with DTMF when preview function is disabled, the phone will hide open door
Calling button automatically.
Configures whether to enable preview function or not. If set to "No", you cannot open door with
Enable Preview
DTMF when there is an incoming call, the phone will hide open door button automatically.

UPGRADING AND PROVISIONING

The GXV34x0 phones can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS
server and selecting a download method. Configure a valid URL for TFTP, HTTP or HTTPS; the server name can be FQDN or IP
address.
Examples of valid URLs:
firmware.grandstream.com/BETA
firrmware.grandstream.com

Upgrade and Provisioning Configuration

There are two ways to setup upgrade and provisioning on GXV34x0 phones. They are Keypad Menu and Web GUI.
Configure via keypad Menu
In GXV34x0 Settings, select Advanced
1. Press Detect New Version to check for new firmware versions if available.
2. Press on Start provision to trigger the provision process
Table 51: Value-added Service/Value-added Service
�� System Updates.
Figure 24: GXV3480 Upgrade – Detect New Version