Table of Contents
Advertisement
2. Check every interval: User needs to specify "number of minutes"
3. Check every day: User needs to specify "Hour of the day (0-23)".
4. Check every week: User needs to specify "Hour of the day (0-23)" and "Day of the week (0-6)".
Note: Day of week is starting from Sunday.
The default setting is "No".
Specifies how firmware upgrading and provisioning request to be sent.
Firmware
● Always Check at bootup.
Upgrade and
● When Firmware/Config File Pre/Suffix Changes.
Provisioning
● Skip the Firmware Check.
If set to "Yes", the phone will pop up a prompt after downloading the firmware files to confirm whether
Upgrade with
start upgrading. Otherwise, the phone will automatically start upgrading process.
Prompt
The default setting is "Yes".
Obtains configuration and upgrade server's information from DHCP server using options 43, 160 and 66.
Allow DHCP
If DHCP option 43, 160 and 66 is enabled on the LAN side, the device will reset the CPE, upgrade,
Option 150, 43,
network VLAN tag, and priority configuration according to option 43 sent by the server. At the same
160 and 66
time, the update mode and server path of the configuration upgrade mode will be reset according to the
Override Server
option 160 and 66 sent by the server.
Default setting is "Yes".
Allow DHCP
Configures the phone system to allow the DHCP offer message to override the Config Server Path via
Option 120 to
the Option 120 header.
Override SIP
Default setting is "Yes".
Server
Allow DHCP
Enables DHCP Option 242. Once enabled, the phone will use the configuration info issued by the local
Option 242
DHCP in Option 242 to configure proxy, transport protocol and server path.
(Avaya IP
The default setting is "Yes".
Phones)
By default, the device will provision the first available config in the order of cfgMAC, cfgMAC.xml,
Download And
cfgMODEL.xml, and cfg.xml (corresponding to device specific, model specific, and global configs). If set
Process All
to "Yes", the device will download and apply (override) all available configs in the order of cfgMAC,
Available Config
cfg.xml, cfgMODEL.xml ,cfgMAC.xml.
Files
Default is "No".
Device will download configuration files and provision by configured order.
Config Provision
Sets the phone system to broadcast the SIP SUBSCRIBE message during booting up to allow itself to be
PNP (3CX) Auto
discovered and be configured by the SIP platform.
Provision
The default setting is "Yes".
Maintenance/Upgrade/Advanced Settings
Send HTTP Basic
Authentication By
Default
Enable SIP NOTIFY
DHCP Option
Config provision
PNP Feature
Determine whether to send basic HTTP authentication information to the server by default when
using wget to download firmware or config file. If set to "Yes", send HTTP/HTTPS user name and
password no matter the server needs authentication or not. If set to "No", only send HTTP/HTTPS
user name and password when the server needs authentication.
Device will challenge NOTIFY with 401 when set to "Yes"
Advertisement
Table of Contents
