Table of Contents
Advertisement
Layer 2 QoS
802.1Q/VLAN Tag
(Ethernet) for VoIP Calls
Layer 2 QoS 802.1p
Priority Value (Ethernet)
for VoIP Calls
802.1x Mode
802.1x mode
802.1x Identity
802.1x Secret
802.1X CA Certificate
802.1X User Certificate
Network Settings/Wi-Fi Settings
Wi-Fi Basics
Enables/disables the Wi-Fi feature.
Wi-Fi Function
The default setting is "Disable".
Sets the type of Wi-Fi Band (2.4G & 5G, 2.4G or 5G).
Wi-Fi Band
The default setting is 2.4G&5G.
Allows to scan and select the available Wi-Fi networks within the range if the Wi-Fi feature is
ESSID
enabled. Click on "Select" to select the Wi-Fi network to connect to. The ESSID will be auto filled in
the ESSID filed.
Add Network
Determines the ESSID of the selected Wi-Fi network. It can be auto filled by clicking the select
ESSID
button on the web page.
Security Mode for
Defines the security mode used for the wireless network when the SSID is hidden. Default is "None".
Hidden SSID
Password
Determines the password for the selected Wi-Fi network.
Advanced Settings
Configure Wi-Fi country code. The default value is "United States of America".
Country Code
Note: Reboot is required to take effect.
Network Settings/OpenVPN® Settings
Enable OpenVPN®
When
Different Networks for Data and VoIP Calls set to Yes, then this option will be
applied for VoIP traffic. Assigns the VLAN Tag of the Layer 2 QoS packets for Ethernet for VoIP
Calls. The Default value is 0.
When
Different Networks for Data and VoIP Calls set to Yes, then this option will be
applied for VoIP traffic. Assigns the priority value of the Layer 2 QoS packets for Ethernet for
VoIP Calls. The Default value is 0.
Enables and selects the 802.1x mode for the phone system. The supported 802.1x modes are:
EAP-MD5, EAP-TLS, EAP-PEAP
The default setting is "Disable".
Enters the identity information for the selected 802.1x mode. (This setting will be displayed
only if 802.1 X mode is enabled).
Enters the secret for the 802.1x mode. This option will appear when 802.1x mode is EAP-MD5
or EAP-PEAP.
Uploads the CA Certificate file to the phone. (This setting will be displayed only if the 802.1 X
mode is enabled)
Loads the Client Certificate file to the phone. (This setting will be displayed only if the 802.1 X
TLS mode is enabled)
Table 31: Network Settings/Ethernet Settings
Table 32 :Network Settings/Wi-Fi Settings
This enables/disables OpenVPN® functionality and requires the user to have access to an
OpenVPN® server. The default setting is No. NOTE: To use OpenVPN® functionalities, users
must enable OpenVPN® and configure all the settings related to OpenVPN®, including
server address, port, OpenVPN® CA, certificate and key. Additionally, the user must also
set the SIP account to use "OpenVPN" for the "Nat Traversal" (under Account-> General
Settings-> Network Settings).
Advertisement
Table of Contents
