Table of Contents
Advertisement
call will not be put on hold and the invited member will join the meeting automatically after
answering the call.
Configures whether to mute the call on entry automatically.
● If set to "Disable", then do not use auto mute function.
● If set to "Auto Mute on Outgoing Call", then mute automatically when the other party answers the
Auto Mute Mode
● If set to "Auto Mute on Incoming Call", then mute automatically when answers the incoming call;
Note: This function only take effect when the phone is from the idle status to call status. Users could
click the Mute button on call interface to cancel the current mute status.
Determines if the speaker will play the ringtone if the speaker channel is not set as default channel.
If set to "Yes", the phone will force to play the ring speaker in speaker channel. The default setting is
Always Ring Speaker
"No".
End user might need this feature when the headset is connected.
Configures the User ID/extension to dial automatically when the phone is off-hook. The phone will
use the first account to dial the configured numbers out.
Offhook Auto Dial
The default setting is "No".
Defines the timer for warm line dialing. After the timer expires, the phone system will dial the
Offhook Auto Dial
configured number in Off-hook Auto Dial automatically. If it is not configured, the configured number
Delay (s)
will be dialed immediately.
If configured, the phone will exit the dial-up screen when timeout after Offhook or Onhook. default is
Off-hook/On-hook
30s.
Timeout (s)
The valid range is 10-60s.
Configures the Handset options and can be set to:
1. If set to "Enable": when off hook, the phone will enter into the dial screen, and the media channel
2. If set to "Disable": The Handset will be disabled.
Handset Option
3. If set to "Auto": when the 3rd-party application is calling, only the media channel will switch to
Default setting is "Auto".
Configures when there are multiple lines, whether to UnHold the line automatically when click the
Auto Unhold When
line being held and hold the line in the primary call.
Note: the hold situation which is set manually will not be put on hold automatically. The default
Pressing Line Key
setting is "No".
If set to "Yes", when processing SIP Register 3XX Response, it will parse the address site in 3XX,
Virtual Account
modify the account server info "SIP Server: port" & "SIP Transaction" in virtual account group and
Group Avaya Mode
initiate registration again. This feature is designed for the Avaya customers.
Configures the amount of concurrent accounts in virtual account group. If the total amount of virtual
Virtual Account
group accounts is "N", the number of accounts the user sets is "n", then the phone will register the
Group Concurrent
first n accounts; If registration for all of these accounts failed, then register the last N-n accounts.
Registration
The default value is 2.
Sets the characters for filter when dial out numbers. Users could set up multiple characters. For
Filter Characters
example, if set to "[()-]", when dial (0571)-8800-8888, the character "()-" will be automatically
filtered and dial 057188008888 directly.
outgoing call.
If set to "Mute on Incoming & Outgoing Call", then mute automatically when the call gets
through.
will switch to the handset; no matter if any third app is opening.
the handset when off hook; otherwise, the phone will enter into the dial screen, and the media
channel will switch to the handset.
Advertisement
Table of Contents
