Table of Contents
Advertisement
Authentication
Enabled Authentication
Server Validation
CA Certificate
User Certificate
Enable EEE Mode
mDNS Override Server
Factory Reset
Maintenance/System Diagnosis
Syslog
Select the transport protocol over which log messages will be carried.
UDP: Syslog messages will be sent over UDP.
SSL/TLS: Syslog messages will be sent securely over TLS connection. To upload server CA
certificate, follow below steps:
Syslog Protocol
Copy CA file in SD card and plug it to the phone.
Go to LCD menu Settings��Security Settings��Install from SD card to install the CA file.
Configures the URI which the phone system will send the syslog messages to.
Syslog Server
The default setting is "log.ipvideotalk.com".
Selects the level of logging for syslog. The default setting is "None". There are 4 levels from the
dropdown list: DEBUG, INFO, WARNING and ERROR. The following information will be included in the
syslog packet:
DEBUG (Sent or received SIP messages).
INFO (Product model/version on boot up, NAT related info, SIP message summary, Inbound and
outbound calls, Registration status change, negotiated codec, Ethernet link up).
Syslog Level
WARNING (SLIC chip exception).
ERROR (SLIC chip exception, Memory exception).
Note: Changing syslog level does not require a reboot to take effect.
Syslog Keyword
Only send the syslog with keyword, multiple keywords are separated by comma.
Filter
keyword to "SIP" to filter SIP log.
Logcat
Clear Log
Clears the log files saved in the phone system.
Log Tag
Configures the filter to display the specified process log file.
Configures whether to validate the server certificate when downloading the firmware/config file.
If enabled, the phone will download the firmware/config file only after the server is validated.
Select the CA certificate for server verification.
Select the user certificate to be used for mutual server authentication. If the private key is
included, upload it with the user certificate.
Configures enable/disable EEE (Energy-Efficient Ethernet) mode. If set to "Yes", the phone will
turn on the EEE mode.
Note: Regardless of whether the EEE mode is turned on or off, the network will reconnect.
Default is "No".
Sets the phone system to broadcast the Multicast DNS (mDNS) message during booting up to
allow itself to be discovered and be configured by the SIP platform. If it is set to "User Type A',
the phone system will broadcast the MDNS message "A_grandstream-cfg.local"; if it is set to
"Use Type SRV", the MDNS message will be "SRV_grandstream-cfg.local".
The default setting is "Use Type A".
Resets the phone system to the default factory setting mode.
Table 42: Maintenance/Upgrade
Example: set the filter
Advertisement
Table of Contents
