User Name
Password
LDAP Number Filter
LDAP Name Attributes
LDAP Number Attributes
LDAP Display Name
Max. Hits
Search Timeout
LDAP Lookup
UPGRADING AND PROVISIONING
The WP810/WP822/WP825 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or HTTPS; the server name
can be FQDN or IP address.
Upgrade and Provisioning Configuration
There are two ways to setup upgrade and provisioning on WP810/WP822/WP825. They are Keypad Menu and Web GUI.
Configure via keypad Menu
1. In WP810/WP822/WP825 Settings, select Advanced Settings System Upgrade.
2. Navigate to Firmware and configure the firmware upgrade server path.
Configures the bind "Username" for querying LDAP servers. The field can be left blank if the
LDAP server allows anonymous binds.
Configures the bind "Password" for querying LDAP servers. The field can be left blank if the
LDAP server allows anonymous binds.
Configures the filter used for number lookups.
Specifies the "number" attributes of each record which are returned in the LDAP search result.
Example:
telephoneNumber
telephoneNumber Mobile
Specifies the "number" attributes of each record which are returned in the LDAP search result.
Example:
telephoneNumber
telephoneNumber Mobile
Configures the entry information to be shown on phone's LCD. Up to 3 fields can be displayed.
Example:
%cn %sn %telephoneNumber
Specifies the maximum number of results to be returned by the LDAP server. Valid range is 1 to
3000. Default is 50.
Specifies the interval (in seconds) for the server to process the request and client waits for
server to return. Valid range is 0 to 180. Default is 30.
Configures to enable LDAP number searching when dialing and receiving calls.
Table 42: Directory/LDAP
Figure 17: Upgrade Configuration via Keypad Menu