Intel Agilex 7 FPGA I Series User Manual page 65

B. Additional Information
721605 | 2023.04.10
Cooling Requirements
Maintain a minimum clearance area of 5 centimeters (2 inches) around the side, front
and back of the board for cooling purposes. Do not block power supply ventilation
holes and fan.
Electro-Magnetic Interference (EMI)
This equipment has not been tested for compliance with emission limits of FCC and
similar international regulations. Use of this equipment in a residential location is
prohibited. This equipment generates, uses and can radiate radio frequency energy
which may result in harmful interference to radio communications. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment on and off, you are required to take measures to
eliminate this interference.
Telecommunications Port Restrictions
The wireline telecommunications ports (modem, xDSL, T1/E1) on this product must
not be connected to the Public Switched Telecommunication Network (PSTN) as it
might result in disruption of the network. No formal telecommunication certification to
FCC, R&TTE Directive, or other national requirements have been obtained.
Send Feedback
®
Intel Agilex 7 FPGA I-Series Transceiver-SoC Development Kit User Guide
65