Etam10 Ecu Adapter; Usage; Mechanical Dimensions; Ecu Signals - ETAS BR-XETK-S1.0 User Manual

71 | Cables and Accessories
7.16

ETAM10 ECU Adapter

Fig. 7-30
MOLEX - MOLEX (6fc - 6fc) adapter cable for connecting an F/XETK to the ECU.
7.16.1

Usage

ETAM10 adapts the ETK power signals (Molex 6 pin connector) to an ECU with a 6
pin Molex PicoSpox connector.
The ECU connector is available as Vertical SMT Header [87437-0643] or Right
Angle SMT Header [87438-0643].
7.16.2

Mechanical Dimensions

Fig. 7-31
7.16.3

ECU Signals

Pin Color
1 Blue
2 Yellow
3 Brown
4 Green
5 Red
6 Red
ETAS BR_XETK-S1.0 | User Guide
FETK/ XETK - ECU Adapter ETAM10
ETAM10 Adapter Dimensions
Signal Description
VDDPSTBY Permanent power supply of ECU interface
(Supply)
VDDSTBY Permanent power supply of ECU ED RAM
(Supply)
Ground Power ground
Cal_Wakeup Switch to Ubatt. ECU wake-up signal (for mea-
surement preparation)
SGUBATT2 Car battery
SGUBATT1 Car battery