Table of Contents
Advertisement
39 | Technical Data
6.3
Configuration
Item
Configuration
Update
6.4
Automotive Ethernet Interface
Item
Connection
Protocol
IP address
Cable length
Ethernet Interface
NOTE
The Automotive Ethernet interface is not compatible with the standard Ethernet
interfaces of ETAS modules. An Automotive Ethernet Media Converter or an
ES88x ECU Interface Module is needed to connect the BR_XETK-S1.0 to the PC.
6.5
Environmental Conditions
Item
Temperature range (operation)
Temperature range (storage)
Relative humidity (non-condensing)
Operating altitude
Contamination level
Degree of protection
Overvoltage category
(AC mains supply)
ETAS BR_XETK-S1.0 | User Guide
Characteristics
Project-specific configuration for
- different microcontrollers or
- memory configurations
stored in EEPROM
Logic devices updated using HSP soft-
ware
Characteristics
Automotive Ethernet 100BASE-T1
XCP on TCP/IP or UDP/IP
Dynamic (standard, for INCA) or static
(e.g. for Rapid Prototyping) by using the
XETK Configuration Tool
(default IP address: 192.168.40.16)
Max. 15 m
DC decoupling
Characteristics
- 40 °C to +110 °C/ - 40 °F to +230 °F
0 °C to +50 °C/ - 18 °F to +122 °F
0 to 95%
max. 5000 m/ 16400 ft
2
Determined by installation in ECU
II
Advertisement
Table of Contents
