Cbeb240 Cable; Usage; Assignment Of The Automotive Ethernet Channels To The Cable Sections; Labeling Of The Automotive Ethernet Channels And The Cable Sections - ETAS BR-XETK-S1.0 User Manual

62 | Cables and Accessories
7.10

CBEB240 Cable

Fig. 7-18
7.10.1

Usage

Cable for connecting the Automotive Ethernet interface (AE) of an ES800 module
to BR_XETKs, ECUs with Automotive Ethernet interfaces or Ethernet-based vehi-
cle buses.
7.10.2 Assignment of the Automotive Ethernet Channels to the Cable
Sections
The CBEB240.1 cable consists of four identical cable sections [n], each mapped to
an Automotive Ethernet channel [n] of the Automotive Ethernet interface (AE)
and wired in accordance with the same pattern. Each of the cable section is
equipped with a LEMO connector.
7.10.3 Labeling of the Automotive Ethernet Channels and the Cable Sec-
tions
The cable sections are labeled n=1 to n=4 and are also marked with the color of the
LEDs corresponding to the channels [n] at the AE connection of the module. The
colors of the channels [n] at the AE connection of the module and the cable sec-
tions are identical.
ES800 module
"AE" LED
1
2
3
4
When using the CBEB240.1 cable at the AE interface of the module ES882.1 (three
Automotive Ethernet channels), three of the four cable sections are used in accor-
dance with the assignment in the table.
ETAS BR_XETK-S1.0 | User Guide
CBEB240.1 Cable
Color
"AE" LED/cable
Purple
Orange
Green
Blue
Automotive Ethernet channel
ES882.1 ES886.1
AE 1 AE 1
AE 2 AE 2
AE 3 AE 3
- AE 4