Table of Contents
Advertisement
38 | Technical Data
6.1.3.2
Use Case: Rapid Prototyping
Îtem
Supported microcontroller
ASCET-RP
INTECRIO
Supported Bypass methods
NOTE
The BR_XETK-S1.0 supports the bypass procedure with DISTAB17. Classical Hook
Based Bypass (HBB) method is not supported. This can be realized via "Hooked
Service Points" (with the help of a SBB Service Point and DISTAB17).
6.2
Data Emulation and Measurement Memory
6.2.1
Data Emulation Memory and Microcontroller Support
The BR_XETK-S1.0 uses a portion of or up to the entire size of the ED RAM, to emu-
late data in internal flash. The following table lists the supported microcontrollers,
the size of the ED RAM, and states if the ED RAM is capable of being powered using
a standby supply.
Microcontroller
TC26x-ED
TC27x-ED
TC29x-ED
TC37x-ED
TC39x-ED
6.2.2
Measurement Data Memory
Item
Location
ETAS BR_XETK-S1.0 | User Guide
Max. ED RAM
0.5 MByte
1 MByte
2 MByte
3 MByte
4 MByte
Characteristicsv
Typically located within the emulation memory when using
DISTAB13 or DISTAB17 hooks. Measurement data memory can
be located in internal RAM if the entire ED RAM is needed for
calibration.
Description
All microcontrollers listed in chapter
6.1.3.1 on page 37
V6.4
V4.6
Service Based Bypass SBB V2.1
Standby powered
Yes
Yes
Yes
Yes
Yes
Advertisement
Table of Contents
