Basic Safety Notices; General Safety Information; Requirements For Users And Duties For Operators; Intended Use - ETAS BR-XETK-S1.0 User Manual

Emulator probe for infineon aurix mcu family
Table of Contents

Advertisement

7 | Basic Safety Notices

1
Basic Safety Notices
This chapter contains information about the following topics:

• General Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

• Requirements for Users and Duties for Operators . . . . . . . . . . . . . . . . . . . . . . . . . 7

• Intended Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

• Classification of Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
• Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.1
General Safety Information
Please observe the Product Safety Notices ("ETAS Safety Notice") and the follow-
ing safety notices to avoid health issues or damage to the device.
NOTE
Carefully read the documentation (Product Safety Advice and this User Guide)
that belongs to the product prior to the startup.
ETAS GmbH does not assume any liability for damages resulting from improper
handling, unintended use or non-observance of the safety precautions.
1.2
Requirements for Users and Duties for Operators
The product may be assembled, operated and maintained only if you have the nec-
essary qualification and experience for this product. Improper use or use by a user
without sufficient qualification can lead to damages or injuries to one's health or
damages to property.
The safety of systems using the product is the responsibility of the system inte-
grator.
General Safety at Work
The existing regulations for safety at work and accident prevention must be fol-
lowed. All applicable regulations and statutes regarding operation must be strictly
followed when using this product.
1.3
Intended Use
An ETK is an electronic component that is installed in a vehicle control unit (ECU)
to read data from the ECU or write data to the ECU.
Application Area of the Product
This product was developed and approved for automotive applications. For use in
other application areas, please contact your ETAS contact partner.
ETAS BR_XETK-S1.0 | User Guide

Advertisement

Table of Contents
loading

Table of Contents